UMAX140940. CAN to Modbus TCP/IP Converter. Version 1
Page: 18-35
3
Modbus TCP/IP Settings
The CAN to Modbus TCP/IP Converter supports Modbus TCP/IP slaves running on Ethernet
port. The number and start address for each of the Modbus TCP/IP
slave’s inputs, coils and
registers can be specified, see Figure 11.
Please note that the slave interface is enabled only if the Modbus TCP/IP master implementation
is not running on that interface.
The number of inputs, coils and registers have an upper limit, and the web server will not accept
values beyond the built-in maximum limit.
Figure 11. Converter Slave Settings
