UMAX140900RST. Ethernet to CAN Converter. Version 1
Page: 11-41
You will need to allow the site to run JavaScript (this setting is default in most web browsers). If
JavaScript is disabled, the website will show a message asking to activate JavaScript at the
top of the web page, see Figure 6.
Figure 6. Enable JavaScript Prompt
The
Ethernet
configuration parameters are combined into
Server
and
Client
groups for
convenience.
The
Ethernet
and
CAN
configuration parameters have tooltips clarifying their meaning, see
Figure 7. A Tooltip
for the “Auto Connect to Remote” Configuration Parameter
3.1 Changing Configuration Parameters
All configuration parameters except the CAN ID range and mask filter settings can be changed
through the
Main Settings
web page. The CAN ID range and mask filters have their own
configuration pages:
CAN ID Range Filters
and
CAN ID Mask Filters
, see Figure 8.
The configuration pages can be reached by clicking on their links on the left side of the
website.
Each configuration web page has fields to enter values of the configuration parameters and
three buttons:
Save Settings
,
Discard Settings
and
Set Defaults
.
The
Save Settings
button will save configuration parameters to non-volatile memory and apply
the new settings. The appropriate converter subsystems will be restarted without rebooting of
the whole converter. The rebooting is available from the
Diagnostics
screen.
