UMAX140900RST. Ethernet to CAN Converter. Version 1
Page: 12-41
The
Discharge Settings
button will bring back the original converter settings before editing, and
the
Set Defaults
button will load the default values of the configuration parameters into the
data fields on the page.
Figure 8. Converter Main Settings Page
The configuration parameters have tooltips for the user convenience. The
Remote IP Address
and
Remote Port
are disabled when
Auto Connect to Remote
is set to
No
.
The page runs a script to check the validity of the new configuration parameters before
uploading them to the web server. For example, the following alert message will be displayed if
the user enters the same value for the
Device Port
and the
Web Server Port
:
