UM AX032200 Version 1.0 39-46
3.13. CAN Receive Setpoints
The CAN Receive setpoints are defined in Section 1.14. Refer to that section for detailed
information on how these setpoints are used. The screen capture below in Figure 17 displays the
available setpoints for the CAN Receive setpoints. Table 29 below highlights the allowable ranges
for each setpoint.
Figure 17: Screen Capture of Default CAN Receive Setpoints
Name
Range
Default
Notes
Message Enabled
Drop List
False
Default changed to
True
for
illustration purposes. Refer
to Section 1.14
PGN
0…65,535
65280
Refer to Section 1.14
Message Timeout
0...60,000
3000
Refer to Section 1.14
Data Size
Drop List
Discrete
2-Bit
0 = Not Used (disabled)
1 = Discrete 1-Bit
2 = Discrete 2-Bits
3 = Discrete 4-Bits
4 = 1-Byte Continuous
5 = 2-Bytes Continuous
6 = 4-Bytes Continuous
Pos Byte
0…7
0
Refer to Section 1.14
Pos Bit
0…7
0
Refer to Section 1.14
Resolution
-
0xFFFFFFFF…0xFFFFFFFF
1.0
Refer to Section 1.14
Offset
-
0xFFFFFFFF…0xFFFFFFFF
0.0
Refer to Section 1.14
Data Minimum
-
0xFFFFFFFF…Data Max
0.0
Refer to Section 1.14
Data Maximum
Data Min…0xFFFFFFFF
1.0
Refer to Section 1.14
Table 29: Default CAN Receive Setpoints
