Step 5 /
Étape 5
:
16” (406.4mm)
Using a pencil, draw a horizontal line and 2 vertical lines spaced
16 inches (406.4mm) apart at desired speaker location.
Align edges of supplied template to lines on wall.
Mark center of each hole though template onto wall.
Pre-screw holes.
Wash off pencil lines before installing bracket.
Strip wire 1/4 inch.
Tighten clamps.
NOTE: Only ONE of the two wall
brackets should be wired.
Loosen clamps and insert wires.
Place bracket on the wall and align with holes.
Fasten bracket with supplied wood screws.
Place grille on speaker.
Place speaker on bracket and gently push down.
Step 3 /
Étape 3
:
Step 4 /
Étape 4
:
Step 1 /
Étape 1
:
Step 7 /
Étape 7
:
Step 8 /
Étape 8
:
Step 6 /
Étape 6
:
Step 2 /
Étape 2
:
Remove brackets from speaker.
Step 9 /
Étape 9
:
Step 10 /
Étape 10
:
Step 11/
Étape 11
:
