Axiom SW212Al, User Manual, Page: 8 / 16

8
LINK
A direct connection from the input connector to link other speakers with same audio signal.
GND LIFT
This switch lift the ground of the balanced audio inputs from the earth-ground of the amplifier module.
PRESET BUTTON
This button has two function:
1) Pressing it while powering on the unit:
ID ASSIGN The internal DSP assigns a new ID to the unit for the PRONET AX remote control operation. Each loudspeaker
must have a unique ID to be visible in the PRONET AX network. When you assign a new ID, all the other
loudspeakers with the ID already assigned must be ON and connected to the network.
2) Pressing it with the unit ON you can select the DSP PRESET. The selected PRESET is indicated by the corresponding LED:
2 x AX16CL This PRESET allows to connect two AX16CL column array elements to POWER OUTPUT speakon connector, see
example.
4 x AX16CL This PRESET allows to connect four AX16CL column array elements to POWER OUTPUT speakon connector,
see example.
1 x AX16CL
This PRESET allows to connect one AX16CL column array elements to POWER OUTPUT speakon connector, see
example.
USER This PRESET corresponds to USER MEMORY no. 1 of the DSP and, as a factory setting, it’s the same to 2 x
AX16CL. If you want to modify it, you have to connect the unit to a PC, edit the parameters with PRONET AX
software and save the PRESET into USER MEMORY no. 1.
NETWORK IN/OUT
These are a standard RJ45 CAT5 connectors (with optional NEUTRIK NE8MC-B RJ45 cable connector carrier), used for PRONET AX
network transmission of remote control data over long distance or multiple unit applications.
TERMINATE
In a PRONET AX network the last device must be terminated (with an inner load resistance) especially in a long run cabling: press
this switch if you want to terminate the unit.
WARNING: only the last devices connected to the PRONET AX network must be always terminated, therefore all units
connected between two devices within the network must not be terminated never.
POWER OUT
SW212A is able to power the passive AX16CL column array module (or other loudspeakers) through the available power output on
the back panel.
WARNING: for the optimal protection and equalization connect the exact number of AX16CL modules specified by the
selected PRESET.