Useful tools to set up properly a vertical array system using the SW1800A subwoofer
��his is a list of tools that can be very useful to set properly a vertical array system with the SW18����A active subwoofers.
CABLE TESTER
It is a good practice to check all cables before each installation, because even one faulty cable can compromise heavily the
system performance.
INCLINOMETER WITH LEVER
��his tool can be used to verify the vertical array angle. It can be used at the top or at the bottom of the array In this
case you have to sum all splay angles, so the maximum precision is needed for aiming the vertical array, particularly
for long throw applications.
LASER DISTANCE METER
��his instrument can be useful to measure the height of the vertical array and to know the distance between FOH-Subs and FOH-Array
for setting the delay time.
SMAART or similar acoustic measurement system
��hese are useful to measure delays, phase and response of the system.
not pressed
pressed
last device
network
network
AX800A
USB2CAN
PC NOTEBOOK
USB 2.0 port
AX800A
AX800A
AX800A
AX800A
SW1800A
ST
ATUS
CONVER
TER
USB
2CAN
COD
E:
S/N
:
RA
TINGS:
RoHS COMPLIANT
MADE IN IT
AL
Y
USB
2CAN
00001
5V --- 200mA
EXAMPLE OF PRONET NETWORK WITH AX800A AND SW1800A
