Axiom SBC8161, User Manual

Page: 21 / 78

SBC8161 Socket 370 All-in-One CPU Card Series User s Manual
Installation
!+
% "*+
1. Make sure the power is OFF.
2. Set the configuration jumpers according to the
jumper settings on Chapter 2.
3. Install the SBC8161 Series CPU card into one of the
slots on the passive backplane. You may allow the
SBC8161 Series to stand alone as a single board
computer.
4. Connect the I/O cables and peripherals, i.e. floppy
disk, hard disk, monitor, keyboard, power supply and
etc. to the CPU board.
NOTE:
The color of pin one is usually red or blue,
while others are gray.
5. Turn ON the system power.