Axiom SBC8153, User Manual

Page: 58 / 76

SBC8153 Pentium All-in-One CPU Card Family User’s Manual
Intel PIIX Bus Master IDE Driver Installation
52
6.2 Installing the Software
This subsection describes how to install the software on a system
where Windows 95 is installed.
NOTE:
Record the location of the Windows 95* directory before
installing the driver.
1. Check the System Requirements. Windows 95* must be
fully installed and running on the system prior to
running this software.
2. Close any running applications.
3. Remove references to installed real-mode IDE device
drivers in the AUTOEXEC.BAT and CONFIG.SYS files
(especially any drivers that control ATAPI CD-ROM and
special IDE features). Use the Notepad utility to do this.
The driver files are stored in an integrated application
setup program. This program is a Windows 95*
program that allows the driver files to be INSTALLED or
DE-INSTALLED.
Execute the driver setup program.
Run SETUP.EXE.
4. Click 'Next' on Welcome Screen to read and agree to
the license agreement. View the text file and choose
File\Exit to close Notepad and continue.
NOTE:
If you click 'No', the program will terminate.
5. Click 'Yes' if you agree to continue.
NOTE: If you click 'No', the program will terminate.
6. Select 'INSTALL', to install the PIIX Bus Master IDE
Device Driver when prompted to do so.
NOTE:
If the driver is currently installed on the system, SETUP
will ask you whether or not you want to continue.
Follow the prompts on the screen to Install the driver if
desired.
7. Click 'OK' to restart the system when prompted to do so.