REAR PANEL
INPUT -
Power input for the external amplifier. The ED60P includes a passive crossover for filtering the signal. It includes also an internal protection
that limits any excessive power to the HF section and, if the signal persists for a long time, it excludes the HF section. The connections are the
following:
INPUT - LINK
NL4 pin number internal connection
1+
+
1-
-
2+
none (pass thru)
2-
none (pass thru)
LINK -
Power output in parallel with the INPUT socket, for connecting the unit to another
speaker. The number of ED60P cabinets that can be connected in parallel depends on the
amplifier load capacity.
HORN ORIENTATION
ED60P features an asymmetrical horn that can be rotated in a few minutes for obtaingn the best coverage according to the speaker configuration.
KPTED60B WALL or TRUSS MOUNTING
Using the “C” shape bracket the ED60P loudspeaker can be installed to walls or mounted to trusses in combination combining with a PLH295.
It allows to aim the speaker in one direction (vertical or horizontal) in 7 steps (-22.5°,-15°,-7.5°,0°,+7.5°,+15°,+22.5°).
VERTICAL POSITION
FOH CONFIGURATION
HORIZONTAL POSITION
FOH CONFIGURATION
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
�ght dispersion
long throw
VERTICAL POSITION
FOH CONFIGURATION
�ght dispersion
long throw
VERTICAL POSITION
FOH CONFIGURATION
wide
dispersion
short throw
wide
dispersion
short throw
�ght
dispersion
long throw
HORIZONTAL POSITION
FOH CONFIGURATION
wide dispersion
short throw
�ght dispersion
long throw
HORIZONTAL POSITION
FOH CONFIGURATION
wide dispersion
short throw
�ght dispersion
long throw
�ght dispersion
long throw
wide dispersion
short throw
�ght
dispersion
long throw
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
wide dispersion
short throw
�ght dispersion
long throw
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
wide
dispersion
short throw
wide
dispersion
short throw
�ght dispersion
long throw
wide
dispersion
short throw