POWER AMPLIFIERS
The AX2065A is powered by DA SERIES digital power modules, a new genera on of CLASS D power ampli
fi
er with digitally-controlled SMPS.
The innova ve technology used for these ampli
fi
ers (including also the use of a variable switching frequency) o
ff
ers performances at the top of
the range, such as a superior sound de
fi
ni on at any audio frequency, very high dynamics also for low level signals and very low distor on even at
the maximum power The superior sound quality can be compared with top-of-the-range AB-class analog systems, while the DA modules feature
a higher dynamics, very compact size and light weight and e
ffi
ciency above 90%. The DA module employed for powering the AX2065A deliver
in an ultra-compact package a maximum power of 2000W, 1000W are delivered to the internal speakers, the other 1000W are delivered to the
AX2065P connected in parallel using the POWER OUT speakon connector.
SIGNAL PROCESSING
The system processing is based on the CORE DSP pla orm, which has been designed by the PROEL R&D Laboratories using one of the most
advanced SHARC DSP for audio applica on. It features 40bit, 96kHz
fl
oa ng point resolu on and high quality 24bit AD/DA converters, for a perfect
signal integrity, a dynamic range in excess of 110dB and a superior sonic performance. Thanks to its massive processing power, the CORE pla orm
is capable of providing the most sophis cated algorithms for speaker processing, together with remote control and networking capability.
The PRONET control so ware, working on a solid and reliable CANBUS based network protocol, provides an intui ve interface for the remote
control of the whole system, with the possibility of eqing, delaying, increasing the protec ons and monitoring the status of the ampli
fi
er.
PRONET
PRONET so ware has been developed in collabora on with sound engineers and sound designers, in order to o
ff
er an “easy-to-use” tool to setup
and manage your audio system. With PRONET you can visualize signal levels, monitor internal status and edit all the parameters of each connected
device.
Download the PRONET app from the AXIOM website at h
Ʃ
p://www.axiomproaudio.com/ clicking on downloads sec
Ɵ
on of the product.
The AXIOM ac ve loudspeaker devices
can be connected in a network and
controlled by the PRONET software.
For the network connec on the PROEL
USB2CAN converter op onal accessory
is needed. The first time you connect
a device with the USB2CAN converter,
Windows O.S. will ask you to install the
driver files, which you can find in the
Driver folder within the Pronet applica on
folder (by default is C:\Program Files\
Proel\Pronet\Driver, or if you changed it
<your path>\Driver). Please refer also to
“Installa on” and “Drivers” paragraphs in
the Pronet documenta on.
The PRONET NETWORK is based on a
robust, reliable and fast communica on
protocol called CANBUS. The devices
in a PRONET NETWORK are connected
together with a “linear bus topology”. The
USB2CAN converter must be connected
to the network input of the
fi
rst device,
the network output of the
fi
rst device is
connected to the input of the second and
so on. For the network connec ons simple
RJ45 cat.5 or cat.6 ethernet cables can be
used (please don’t confuse a ethernet
network with a PRONET network these
are completely di
ff
erent and must be fully
separated also both use the same kind of cable).
The beginning and the end of a PRONET NETWORK must be terminated. One side is terminated by the USB2CAN converter, the other side must
be terminated pressing the TERMINATE switch on the last device. All devices between these two points must have the TERMINATE switch li ed.
Assign the ID number
To work properly in a PRONET network each connected device must have a unique iden
fi
er number, called ID. By default the USB2CAN PC
controller has ID=0 and there can be only one PC controller. Every other device connected must have its own unique ID equal or greater than 1:
in the network cannot exist two devices with the same ID.
An ID number is assigned automa cally to each devices when they are turned on for the
fi
rst me connected to a network.
In order to correctly assign a new available ID to each device for working properly in a Pronet network, follow these instruc ons:
1.
Switch o
ff
all the devices.
2.
Connect them correctly to the network cables.
3.
“TERMINATE” the latest device in the network connec on.
4.
Switch on the
fi
rst device keep pressed “PRESET” bu on on the control panel.
5.
Leaving the previous device switched on, repeat the previous opera on on the next device, un l the latest device is turned on.
not pressed
pressed
last device
network
network
AX2065A
USB2CAN
PC NOTEBOOK
USB 2.0 port
AX2065A
AX2065P
AX2065A
AX2065P
SW215A
ST
A
TUS
CO
N
V
ER
TE
R
USB2CAN
CODE:
S/N:
RA
TINGS:
RoHS COMPLIANT
MADE IN IT
AL
Y
USB2CAN
00001
5V --- 200mA
EXAMPLE OF PRONET NETWORK WITH AX2065A AND SW215A