USER MANUAL
AX2065A
ac ve ver cal array loudspeaker
KEY FEATURES
• High output line array element
• Transmission Line back loading for clean mid-bass reproduc on
• Compact size, very good output-to-weight ra o
• Natural sound Transmission Line HF projec on wave-forming device
• High quality, low compression, low distor on HF driver
• 96KHz / 40 bit
fl
oa ng point CORE processing with PRONET remote control
• Very stable horizontal coverage
• Digitally controlled Class D ampli
fi
er module with SMPS
INTRODUCTION
The AX2065A Ver cal Line Array element is designed for a wide range of sound reinforcement applica ons where a
fl
exible and easy to use ver cal
array systems is needed. The AX2065A has been designed both for rental live sound applica ons and for
fi
xed installa ons and has been engineered
for the simplest use possible but without sacri
fi
cing anything in sound quality and performance.
The high frequency range is reproduced by a low-distor on compression driver, equipped with very light-weight
Titanium diaphragms and a special new suspension design for
very natural sound. A transmission line wave-forming waveguide
has been used to load the HF driver, in order to provide a detailed
and natural sound and to achieve a long-distance HF projec ng
capacity.
The two 6.5” woofers are back loaded by a short hybrid
transmission line that minimizes the e
ff
ect of the box resonances
and eliminates the “boxy” mid-bass sound commonly obtained from regular bassre
fl
ex enclosures.
The AX2065A is processed by 40bit, 96kHz
fl
oa ng point CORE DSP and powered by DA SERIES digital
power modules, a new genera on of CLASS D power ampli
fi
er with digitally-controlled SMPS. The
DA module employed for powering the AX2065A delivers in an ultra-compact package a maximum
power of 2000W and each AX2065A is able to power an addi onal passive AX2065P module through
the available power output on the back panel. This feature will allows to assemble very compe ve
hybrid solu ons both for rental and installa on applica ons.
TECHNICAL SPECIFICATION
Acous
Ɵ
cal
Remote Controls
PRONET control so ware
System type
Line Array Element
Short Transmission Line LF Back Loading
Acous c Transmission Line HF Waveguide
Network protocol
CANBUS
Ampli
fi
er Type
Class D with Variable Switching Frequency
and SMPS
Low frequency transducer
Two 6.5” (165 mm), 1.5” (38 mm) aluminium
voice coil, 16
Ω
each, paralleled
Output Power
2x 1000 W
Mains Voltage Range (Vac)
230 V~ ±15% or 115 V~ ±15% 50/60 Hz
High frequency transducer
One 1.4” driver, 2.5” (64 mm) edgewound
voice coil, tanium diaphragm,
8
Ω
each, paralleled
Mains Connector
PowerCon® (N NAC3MPB)
Consump on*
700 W (nominal) 1700 W (max)
IN / OUT Connectors
Neutrik XLR-M / XLR-F / Speakon NL4MP
Frequency response (±3 dB)
80 Hz – 18 kHz (Processed)
IN / OUT Network Connectors
ETHERCON® (NE8FAV)
Horizontal Coverage Angle
110° (-6 dB)
Mechanical
Ver cal Coverage Angle
12° (-6 dB)
Width
583 mm (22.95”)
Maximum Peak SPL @ 1m
129 dB
Height
244 mm (9.60”)
Electrical
Depth
481 mm (18.93”)
Input Impedance
20 k
Ω
balanced
Taper angle
5°
Input Sensi vity
+4 dBu / 1.25 V
Construc on
15 mm, reinforced Phenolic Birch
Signal Processing
CORE processing, 96kHz / 40bit
fl
oa ng
point SHARC DSP, 24 bit AD/DA converters
Paint
High resistance, water based paint
Suspension system
Direct access Controls
4 Presets: Standard, Long Throw, Down Fill-
Single Box, User.
Network Termina on, GND Link
Front Suspension
Aluminium Fast Link structure with ¼ Fast Pin
Back Suspension
High Strength Steel with ¼ Fast Pin
Net Weight
22.5 Kg (49.6 lbs.)
* Nominal consump
Ɵ
on is measured with pink noise with a crest factor of 12
dB, this can be considered a standard music program.
revision 2014-11-10