11
STACKED INSTALLATION USING KPTSTANDAX16CL FLOOR STAND
WARNINGS:
•
The ground where the KPTSTANDAX16CL floor stand is placed needs to be stable and compact.
•
Adjust the feet so to put the KTPSTANDAX16CL perfectly horizontal. Use a spirit level to obtain the best result.
•
Always secure ground stacked setups against movement and possible tipping over.
•
A maximum of 2 x AX16CL or 4 x AX8CL or 1x 2x AX8CL speakers are allowed to be installed over a
KPTSTANDAX16CL serving as ground support.
•
When 2 column units are stacked both must be setup with 0° aiming.
1 - Remove the knob (A) from
column and screw it in the base,
loosen the knob (E).
2 - Place the first column (B).
3 - Insert the front pin (C).
4 - Insert the rear pin (D) in
the desired aiming position.
5 - Tighten the knobs (A)
and (E).
6 - Loosen the knobs (H) and (L).
7 - Place the second column (I).
8 - Insert the front pin (F).
9 - Insert the rear pin (G) in the
desired aiming position.
10 - Tighten the knobs (H)
and (L).
A
B
C
D
E
F
G
I
H
L
