RIGGING INSTRUCTIONS
AX1012A arrays deliver seamless coverage only to desired areas minimizing unwanted reflections of walls and surfaces or avoiding interactions
with other sound systems, with the stage or with other areas. Multiple units in horizontal or vertical array allow to shape the radiation pattern in
slices of 20°, providing exceptional flexibility in the construction of the desired coverage angle.
The AX1012A cabinet is provided with four integrated steel rails, to be used for coupling the cabinets with the KPTAX1012 aluminium coupling
bars. A comprehensive set of accessories is available for rigging horizontal or vertical arrays, for ground-stacking the systems and also for pole
mounting one or two units. The rigging system does not require additional adjustments, since the aiming angle of the array is determined only by
using the proper hole in the flying bars with the use of the predicting software.
The following instructions show how to proceed to assemble the speakers in order to form various type of array, starting from a simple 2 units
horizontal array to more complex ones: please read all of them carefully.
2-UNIT HORIZONTAL ARRAY
Follow the sequence below to couple two AX1012A units in an horizontal array: you can use the same procedure for assembling all horizontal
arrays. Each AX1012A has several bumpers on each side of the box that fits in the slots of the adjacent box: this allows to arrange the boxes
perfectly aligned for inserting easily the coupling and flying bars.
1) Place the box on the floor exactly under the lifting point.
2) Remove the locking plate at the end of the flying bar.
3) Insert the bar in the rails from the front of the speakers.
4) Put back in place the locking plate and lock it with the pin.
5) Place the cam into the hole chosen for lifting: always be sure that
all pins are firmly inserted in their position.
6) Connect the lifting system using the supplied shackle.
