5
CAUTION:
•
Before making measurements ensure that the function selector switch is set on the appropriate
range position
•
Always make sure that the plug of each test lead is inserted fully into the appropriate terminal of
the meter.
•
Ensure that the function selector switch is set to the “OFF” position after use. When the meter
will not be in use for a long period of time, place it in storage after removing the battery.
•
Do not expose the meter to direct sunlight, extreme temperatures or moisture.
•
Do not use abrasives or solvents on the meter. To clean it use a damp cloth and mild detergent
only.
Qualified and trained service technicians should only perform calibrations and repair of the meter.
3. FEATURES
•
True RMS measurement of AC Current and AC Voltage
•
Large 4000 count LCD display with a bargraph and a bright white LED backlight.
•
Wide measuring range from 0,01A AC/DC up to 1000A AC/DC
•
Measures AC and DC Voltage up to 600 volts.
•
Measures resistance from 0,01
Ω
up to 40M
Ω
•
Capacitance measurements up to 40mF
•
Temperature measurement from -40
°
C to +1000
°
C and -40
°
F to +1832
°
F
•
Designed to the international safety standard IEC61010 CAT III 600V/CAT III 1000V.
Pollution degree: 2
•
Auto Power Off after approximately 20 minutes to conserve battery life.
•
Continuity Buzzer and Diode Test
•
Frequency measurement up to 4kHz.
•
Peak Hold to record the minimum and maximum readings for current and voltage.
•
Data Hold switch used to freezer reading on display.
