3.2.4. Continuity Check
To avoid electrical shock and/or damage to the instrument, disconnect circuit power and
discharge all high-voltage capacitors before testing for Continuity.
To test for continuity (set up the Meter as shown in Fig. 3-4):
1. Touch the key 9 once to enter the continuity check mode.
2. Connect the black and red test leads to the COM and Ω terminals respectively.
3. Connect the test leads to the resistance in the circuit being measured.
4. When the test lead to the circuit is below 50Ω, the buzzer will sound. And the Red backlight will
indication.
NOTE:
Continuity test is available to check open/short of the circuit.
3.2.5. Diode Test
To avoid electrical shock and/or damage to the instrument, disconnect circuit power and
discharge all high-voltage capacitors before testing diodes.
