2021-11-03 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_UIM-1-00.pdf
Page 9 of 20
3.1. Configuration of the output modulator with the operating keys
You can configure the output modulator of the device using the LCD display and the buttons on the top of the
device.
è
Press the ENTER key, the Setting menu appears.
Important setting options:
•
Use the
Standard
parameter to switch between DVB-T and DVB-C.
•
Use the
RF Freq
parameter to set the channel number or the centre frequency of a channel.
You must select a free channel in your TV network.
•
With the
Service
parameter, you set a service name with an aplhanumeric menu. This appears as the
programme name in the TV set.
•
In the
LCN
parameter, set the programme number. This must not collide with existing programme
numbers.
You must select a free LCN
.
è
Press the ESC key to exit the menu.
A prompt appears asking if you want to save changes you have made.
è
Select Yes and press the ENTER key.
Use the up/down keys
to move through the
setting menu
Use the right/left keys to
select parameters
Press ENTER to enter
the menu or
submenus, press ESC
to exit the menu.
