decrease level
increase level
Acoustic signal on/off
Background illumination on/off
LCD display
LNB
connection
Receiver
connection
Operation:
The LCD display shows the LNB voltage, polarization H or V and 22 kHz for
high band.
If the LNB receives a SAT signal, then it will be displayed in percent and as
a bar diagram.
The keys
and
can be used to adjust the input sensitivity.
t
u
If the level value exceeds 90 %, press the key
. Every key press reduces
t
the level display by approx. 10% and by one bar.
If the SAT antenna signal is too weak, press the key
u
.
After adjusting the level display, the SAT antenna can be adjusted to the
maximum level.
If the visibility to the SAT finder is impaired, the acoustic signal can be
added to adjust the SAT antenna. The rule is, the stronger the level, the
higher the sound frequency.
After adjusting the dish, please connect the LNB to the receiver/multiswitch
again.
Field of application:
The SZU 17-02 is a SAT signal level meter for the analog and digital range
and is used for the adjustment of SAT antennas. If the device is used for other
purposes, no warranty will be given!
Product description:
The SZU 17-02 allows to search andadjust any satellite by means of a LCD
display or an acoustic signal. The polarization (H/V) and high band (22 kHz)
are also shown on the LCD display. The LCD display has a background
illumination, which can be switched on or off.
Connection:
4
Connect the LNB directly to the “LNB” marked F socket, e.g. with a F
Quickfix connecting cable SAK 151-00.
4
Connect a SAT receiver or a multiswitch to the output marked with
“Rec”.
4
Switch on the SAT receiver or multiswitch.
The SZU 17-02 is supplied with power via the receiver or multiswitch.
