Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EWR contact adress
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
State of the art 2017-06-14
Technical changes, design modifications, errors and misprints are subject to
change without prior notice.
Safety advices:
Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
Before opening the equipment pull out the power plug or remove the
power supply, otherwise there is danger of electrocution. This is also
valid for cleaning the equipment or working on the connections.
Only use the mains cable connected to the device. Never replace any
parts or make any modifications on the mains cable. Otherwise there is a
risk of mortal injury for which we cannot be held liable.
Providing that a serviceable fuse exists, the power cord must be pulled
out before changing the fuse. Defective fuses may only be replaced with
standard compliant fuses that have the same nominal value.
The equipment may only be operated in dry rooms. In humid rooms or
outdoors there is danger of short-circuit (caution: risk of fire) or
electrocution.
Choose the location of installation or mounting so that the power plug
can be reached and pulled out of the socket easily in case of danger.
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. Power feeding cables as well as feeder lines may not
be damaged or clamped by objects of any kind. To prevent damage to
your equipment and to avoid possible peripheral damages, the devices
foreseen for wall mounting may only be installed on a flat surface.
Choose the location of installation or mounting so that under no circum-
stances liquids or objects can get into the equipment (e.g. condensation,
water coming from leaking roofs or flowing water, etc.).
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Devices
that are equipped with heat sinks or ventilation slots must under no
circum-stances be covered or blocked. Also ensure for a generous air
circulation around the equipment. In this way you avoid possible damage
to the equipment as well as a risk of fire caused by overheating.
Absolutely avoid that cables come near any source of heat (e.g. radio-
ators, other electrical devices, chimney, etc.).
SVS 2-00 | SVS 2-01
SVS 2-02 | SVS 2-04
SVS 2-05 | SVS 4-00
basic
-line
SAT inline amplifiers
Operation Instructions
Technical data:
Your device is marked with the WEEE symbol (Waste Electronics and
Electrical Equipment). This means that the electrical and electronic
components must not be disposed of as residual waste. Used electrical and
electronic components must be disposed of separately.
WEEE Nr.
DE26869279
Article
SVS 2-00
SVS 2-01
SVS 2-02
SVS 2-04
SVS 2-05
SVS 4-00
EMC
according to EN 50083-2,
class
A
Frequency range
TERR | SA
T
– | 950…2400 MHz
47…2400 MHz
47…2400 MHz
85…2400 MHz
47…862 MHz | 950…2400 MHz
Gain
TERR | SA
T
– | 15…18 dB
– | 20 dB
14…20 dB
10 dB
8…15 dB
12…14 dB |
14…17 dB
Equalization
TERR | SA
T
– | 3 dB
– | –
6 dB
–
7 dB
2 dB | 3 dB
Return path,
passive
–
5…65 MHz
–
Noise figure
7 dB
8 dB
6 dB
Max.
output level
3rd order max.
1
3rd order SA
T max.
2
–
106 dBµV
87 dBµV 108 dBµV
95 dBµV 97 dBµV
94 dBµV 114 dBµV
101 dBµV 113 dBµV
DC power pass
yes
Operating voltage
14…18 V=
Current consumption (without LNB supply)
≤40 mA
≤ 80 mA
≤ 40 mA
45 mA
≤ 40 mA
Max.
DC pass
300 mA
300 mA
1000 mA
600 mA
1000 mA
400 mA
Dimensions (W × H × D) appr
.
85 × 26 × 20 mm
54 × 15 × 15
mm
85 × 26 × 20
mm
100 × 35 × 25 mm
1
EN50083-3 60dB KMA
2
EN50083-3 35dB KMA
