Operation instructions | SKT 40-0x | SKT 80-0x | SKT 40-0xM | SKT 80-0xM
20 2017-01-26 | Technical changes, design modifications, errors and misprints are subject to change without prior notice.
Assigning programmes to the modulators
In the cross multiplex mode, the tuners are no longer assigned to the modulators.
Click the table Tuner 1 and in the table Tuner 3 on the buttons M1.
The three programmes are assigned to modulator 1.
Important:
∂
The cross multiplex mode can not be used for CA programmes, which are encrypted in the haeadend!
∂
A splitted transponder works like two transponders.
∂
If you use the cross multiplex mode in several modules, the network IDs of the modules have to be
different.
Programs,
which are
assigned to
modulator 1
