Weather protection housing:
The unicable multiswitches are delivered in a weather protection housing.
Therefore they can be easily and reliable mounted at the aerial mast
outside.
Easy to mount with cable binders
Technical specifications:
SES 46-00
SES 86-00
Inputs
SAT
4
8
Subscriber ports
1
Frequency range
Transmission frequencies
SAT
950...2200 MHz
1280 MHz
1382 MHz
1484 MHz
1586 MHz
1688 MHz
1790 MHz
Output level
Subscriber ports
90 dBµV
Operating voltage
12...18 VDC
iInternal current consumption
without LNB
230 mA
300 mA
LNB supply
14 V/18 V
Transient current for LNB
max. 500 mA
External switching power
supply unit for LNB
SZU 99-22
SZU 99-14
Field of application:
Product description:
Constant output level due to AGC
Power supply:
The devices are only suitable for amplifying and distributing radio and television
signals or multimedia signals inside the house! If a device is used for other
purposes, no warranty is given.
The unicable multi switches SES 46-00 and SES 86-00 are operated on a
Quattro LNB (SES 86-00 two Quattro LNB) and supply all channels of the
receiving satellite to each of the up to 6 receivers. For this, the programs are
converted into defined frequences. The following transmission frequencies are
used to convert the programs for the maximum number of 6 receivers which
can be connected:
1280 MHz, 1382 MHz, 1484 MHz, 1586 MHz, 1688 MHz, 1790 MHz. It is useful
to assign the highest frequency to the receiver which is mounted closest to the
multi switch, the second highest frequency will be assigned to the next receiver
and so on in order to compensate the frequency-dependent cable attenuation or
the through loss of the sockets.
Each receiver must be set to the unicable solution.
As specified in the user manual of the respective receiver manufacturer, each
receiver is assigned its own user identification and its own transmission
frequency. This data should be noted, to simplify setting the receiver, for
example when changing the receiver later on.
At an input level of 60...90 dBµV, 90 dBµV, controlled by AGC (automatic gain
control), are always available at the user output.
The SES 46-00 / SES 86-00 are supplied by the connected receivers. For the
voltage supply of the LNBs, the external power supply unit SZU 99-22 / -14 is
required.
The maximum transient current to supply the LNB must not
exceed 500 mA.
Only receivers fully compliant with EN 50494 can be operated.
Note:
4 × SZU 6-02
Overvoltage protection:
Recommandation
: Use overvolta-
ge protection devices (like e. g.
AXING SZU 6-02) to protect your
devices against overvoltage.
HF connection:
!
!
!
Connect the SAT inputs of the single-cable multiswitch to the LNB outputs of
your SAT reception antenna.
Connect the output of the single-cable multiswitch to the antenna sockets.
When selecting the antenna sockets, make sure they are fitted with a diode-
decoupled DC continuity (for example programmable antenna sockets
SSD 6-xx and programmer SZU 60-00, made by AXING)
Use screened coaxial cables with F connectors. Suitable cables and plugs
can be found in the current AXING catalogue or at www.axing.com.
Recommendation:
The programmable antenna sockets SSD 6-xx with
integrated microcontroller protect the digital single-cable systems against
interferences and manipulations.
With the help of the programmer SZU 60-00 and a programming software, so-
called user bands for the sockets are set. Only receivers which are adapted to
the user band of the socket have access to the programs.
UB6
MHz
1790
UB6
MHz
1790
SSD
6-xx
SSD
6-xx
UB5
MHz
1688
UB5
MHz
1688
UB2
1382 MHz
UB2
1382 MHz
UB1
1280 MHz
UB1
1280 MHz
UB3
1484 MHz
UB3
1484 MHz
UB4
1586 MHz
UB4
1586 MHz
