axing SAT-Navi, Operation Instructions Manual

Page: 7 / 16

Operation Instructions SZU 21-00
Chapter 2: Power supply
14.04.11 © AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
7
2
Power supply
There are three ways to establish the power supply of the device:
2.1.1 External power supply
•
Connect the external power supply to the DC-power supply socket (1).
•
Make sure the slide switch (2) is in the position (“EXT”).
Fig. 4: DC-power supply socket (1),slide switch (2)
2.1.2 Satellite receiver
•
The SAT-Navi can be operated by delivering the power remotely from a satellite
receiver or multiswitch (which may be supposed to be connected to the LNB after
searching the Satellite).
•
The receiver/multiswitch should be able to deliver 600mA of current to the LNB!
•
Make sure the power supply selector is in the position (“EXT”).
•
Connect the LNB/IF input of the satellite receiver to the DC power supply input (8)
of the SAT-Navi
•
If the SAT-Navi does not power up or switches off when trying to search satellites,
the current delivered by the receiver may be insufficient. Please use another
receiver or another way of supply.
2.1.3 Internal batteries
•
Make sure, you have inserted fitting batteries into the compartment in the right
direction.
•
Put the Power Supply Selector in the lower position (“BATT”) to activate battery
operation.
•
You can use non-rechargeable and rechargeable batteries in AA size.