Field of application:
The EoC 10-02 connects WiFi and Ethernet devices over established coaxial
cable to an EoC 10-01 Master.
The EoC 10-01 Master connects the EoC network to the Internet. The advan-
tage of an ethernet over coax solution is, that no network cables must be laid.
The data is transmitted through the low-attenuation return path of the coax
network.
Scope of delivery
9
EoC 10-02
9
CAT5 ethernet cable
Connects from LAN port to Ethernet devices as PC or STB
9
12 VDC power adapter for power supply
Hardware connections:
Select a convenient location for the EoC near the PC or Ethernet device to
which it will be connected. The device should be kept away from excessive
heat.
Please make sure the coaxial network is well grounded.
Use a coaxial cable to connect the G.hn port to the on the antenna wall
outlet.
Use another coaxial cable to connect the TV port to a TV set (optional).
Connect the LAN1/LAN2 port to your Ethernet-equipped device.
Connect the power adapter to the DC12V port and connect it to a wall
outlet.
Ports on the rear panel:
Port Name
Button
Type
Functions
A G.hn
F
Connect to the antenna wall outlet
B TV
F
Connect to TV
C LAN1/LAN2
RJ-45 Connect to PC or STB or other Ethernet devics
D R
–
Reset Button
E DC12V
DC
Connect to the power adapter plug
Configuration
The configuration of the EoC 10-02 is done with the EoC 10-01 Master.
Detailed operation instructions of the devices are available at
www.axing.com at the section Downloads | Operation instructions.
LED Indicators on the Rear Panel:
LED
Status
On
Flashing
OFF
1
Link
Act
Quality
Link
Receive or
transmit
Disconnect or
Link fail
Green: High
Orange: Medium
Red: Low
2
LAN2 Link
Act
Link
Receive or
Transmit
Disconnect or
Link fail
3
LAN2 1000 1000Mbps
N/A
100Mbps
4
LAN1 Link
Act
Link
Receive or
Transmit
Disconnect or
Link fail
5
LAN1 1000 1000Mbps
N/A
100Mbps
6
Verbunden
Emfang/Senden
Nicht verbunden
7
PWR
Powered by
DC12V
N/A
Not powered
A
B
C
D
E
1
2 3 4
5
7
6
Front view
Rear view
