2021-09-03 | Technical improvements, changes in design, printing- and other errors reserved.
11
2.4. SFP+ interface 10 GE for internet access
2.4.1. Installing the optical module
A suitable SFP+ module (Enhanced Small Form-factor Pluggable) is required for the connection.
Laser radiation is invisible to the human eye.
•
Direct eye exposure to laser beam may cause physical damage.
•
When performing work on the optical distribution network, make sure that the lasers of the connected
transmitter have been switched off by disconnecting the mains plug.
•
Do not open the unit or tamper with it! Under no circumstances should you look inside the optical
connectors either with the naked eye and/or optical instruments! This can prove seriously harmful to your
health. Laser radiation is invisible to the human eye.
•
This unit may be only be operated by personnel who have received the necessary training in handling
optical and electrical devices and have been instructed in the safety rules for handling lasers.
2.4.1.1.Connecting optical fibers
Make sure that the end face of the optical fiber is clean and that an SC/UPC or LC/UPC connector is used.
è
Remove the SC/UPC protective cap.
è
Insert the SC/UPC connector into the interface of the optical module with a fastener (namely the front end)
as shown below. If you hear a clicking sound inside the optical module, the connector is correctly inserted.
è
Then insert the SFP+ module into the 10 GE interface of the CMTS 2-00.
