Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EEA contact address
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
State of the art 2018-10-08
Technical changes, design modifications, errors and misprints are subject to
change without prior notice.
Safety advices:
Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
To prevent damage to your equipment and to avoid possible peripheral
damages, the devices foreseen for wall mounting may only be installed
on a flat surface.
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. The mains cable as well as feeder lines may not be
damaged or clamped by objects of any kind.
Choose the location of installation or mounting so that under no
circumstances liquids or objects can get into the equipment (e.g.
condensation, water coming from leaking roofs or flowing water, etc.).
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Absolutely
avoid that cables come near any source of heat (e.g. radioators, other
electrical devices, chimney, etc.).
SPU 81-00 | SPU 81-02
basic
-line
8 in 1 | 2 × 8 in 1
DiSEqC switches
Operation instructions
Technical data:
Article
SPU 81-00
SPU 81-02
Type
8 in 1
2 × 8 in 1
Switching criteria
Position + Option + Uncommi DiseqC 1.2 „drive to position x“ (6Bh)
Supported DiSEqC level of the SA
T receiver
1.1 | 2.1 | 1.2 | 2.2
Frequency range (upstream |
TERR | SA
T)
– | – | 950…2200 MHz
Number of inputs
8
2 × 8
Subscriber ports
1
2
Through loss SA
T
typ
. 2,5 dB
Isolation between LNBs
≥ 30 dB
Ambient temperature range (acc.
to EN 60065)
-20…+50°C
Dimensions (W × H × D) appr
.
150 × 110 × 30
155 × 110 × 50
DiSEqC switching criteria:
Position
Option
Uncommitted_1
drive to position x (6Bh)
= extension of 2 LNBs
= extension of 3-4 LNBs
= extension of 5-8 LNBs
= motor driving comand DiSEqC 1.2
Herewith AXING AG declares that the marked products comply with the valid
guidelines. You can call up the complete EU declaration of conformity for
download by entering the article in the search field at www.axing.com.
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.
