GENERAL
NA Series Operating & Instruction Manual
Page 1
ATTENTION !
GENERAL
AxFlow Aturia NA series pumps are single stage mechanically coupled end suction pumps. Details of
the pump type and model, serial number and operating data are indicated on the pump nameplate.
The pump must be installed and operated in full compliance with these instructions. The pump may not
be operated outside the limits specified on the nameplate and within this manual. The pump should
only be operated by skilled trained personnel. The manufacturer will not accept liability if these
instructions are not followed.
This manual does not take into account any specific local regulations or bylaws that may be applicable,
and it is the responsibility of the installer to ensure compliance with such regulations.
Precautions during operation
Always take the following safety precautions :
The coupling guard must be at its place on the baseplate.
If warm liquids are pumped, protect the pump to prevent contact with warm pump surfaces.
Never put your hands or any kind of object into pump openings where the shaft rotates
(see picture)
Protect motor and all
electric parts according to
current regulations
