Axesstel PX120N, User Manual, Page: 20 / 27

17
CDMA FWP
PX120N
Tones
1 Ring Tone
2 Volume
3 Alert
…
Ring Tone
1 In Contacts
2 Not In Contacts
3 Messages
Tone1
Tones
1 Ring Tone
2 Volume
3 Alert
…
Volume
1 Ring Tone
2 Key Beep
3 Handset
4 Handsfree
Med
Tones
1 Ring Tone
2 Volume
3 Alert
…
Alert
1 Minute Beep
2 Call Connect
3 Power On/Off
On
Settings
1 Tones
2 Display
3 Security
Select Back
Display
1 Banner
2 Backlight
3 Contrast
4 Language
Welcome
Banner 7/20 abc
welcome
Save Back
Display
1 Banner
2 Backlight
3 Contrast
4 Language
15 Seconds
10 Settings
10.1 Tones
Here you can set the ring tone and volume. Press <MENU> , (settings) ,
press <-> to select Tones .
10.1.1 Ring Tone
In Tones MENU, select <1 Ring Tone> , press< OK >, you can set the
ringer for In Contacts, Not In Contacts, and Messages. Press< OK >to
save your setting.
10.1.2 Volume
In Tones MENU, select <2 Volume> , press< OK >, you can set the volume
for Ring Tone , Key Beep, Handset, Handsfree . Press< OK >to save your
setting.
10.1.3 Alert
In Tones MENU, select Alert , press <OK> and then you can turn on/off
the alert of Minute Beep, Call Connect, and Power On/Off.
10.2 Display
Here you can set the banner , backlight , contrast , language .
10.2.1 Banner
In standby screen, Press< MENU >, < Settings >, < 2 Display >, < OK > to
enter display menu.
Select
<1 Banner> , press< OK >, you can change the banner of the phone.
Press< MENU >to save your setting. When you are back to the main page,
you can see the banner you set.
Note: You can press< # > to switch the input method. You can input 20
digits at most.