1xEV-DO Wireless Broadband Modem AXW-D800/D1900
Axesstel
6
Desktop Installation
The 1xEV-DO Modem operates by receiving electricity from an electrical outlet.
1 Connect the antennas on the connectors of each side of the unit..
2 Connect the Modem to computer using RJ-45 Ethernet Cable (CAT 5) or USB
cable.
3 Move the connection selector switch to USB or Ethernet.
4 Connect the power adaptor to the DC 9V socket of the modem.
4 Plug the AC adaptor into an appropriate electrical wall outlet.
5 Turn on the power switch located next to the DC 9V socket.
Wall Mount Installation
1 Mark two mounting holes on the wall using the hole locator on the last page of
the manual.
2 Drill two holes at the marked locations.
3 Tighten the screws until the head is about 5mm from the wall.
4 Hang the modem on the screw using the two holes in the back.
5 Push the modem down until the unit is firmly locked into place.
