10
Insert SIM
MEMU
3.
Simple
Instructions
3.1 ON/Off
At first, make sure the power is OFF and SIM card has been properly inserted into
your phone. Turn on the power switch, then press and hold the key for 3 seconds.
Wait for the banner of your service provider to appear and you can start to use. (The
left bar shows the battery charge level, and the right bar shows you the signal
strength of the cellular network at your current location. It shows the strongest the
signal when there are five bars.) If there is power providing
but no SIM card, the phone will clue you to insert the SIM
card? After insert your card it will detect the card
automatically. The vision of the screen is:
3.2 Making a Call
¾
Number
Editing
At the off-hook or hand-free state, enter the number you want to call. You can press
▲
or
▼
key to move your cursor, or press the "CLEAR" key to delete the number
before the current cursor.
¾
Calling
At the off-hook or hand-free state, enter the number you want to call and press " "
key or just wait for about 7 seconds. When you finished conversation, replace the
handset or press the " " key to end the call.
¾
Calling fix sub-phone
For Some fix sub-phone you can't make a call directly, you should call main-phone first
and then sub-phone. Insert a "P" between the two phone numbers, and then the phone
will help you complete all calling job, just do as follow: pressing # key until a "P" appears
on LCD.
¾
Emergency
call
Please ensure your phone is power on and among the GSM network, at the off-hook
or hand-free state, you could call out the emergency number directly without SIM card.
¾
One-touch
dialing
At the standby or hand-free state, press 0-9 for a while, then the number store in
<Speed dial list> will be dialed out. (Or input the number 0-9, end as #, and then
press the left soft key to confirm it).
¾
Dial in menu "naming card"
At the off-hook or hand-free state, you could enter it by pressing the right soft key,
then press
▲
or
▼
key to search the name you need, then press the left soft key to
view the number of it. Press this key once again then the calling is established. Or
you could locate on the desired name by press the first letter of corresponding name.
