Axent PRIMUS, User Manual, Page: 9 / 12

9
MALFUNCTIONS DURING OPERATION
IN CASE OF THE FOLLOWING PHENOMENA, PLEASE SHUT OFF THE WATER INLET VALVE IMMEDIATELY.
- Water leakage.
PREPARE FOR CHECK
Check the Power Supply Check Water Supply
- If the power supply could work normally - If the water supply could work normal
- If the water inlet valve is shut off
FREQUENTLY ASKED QUESTIONS
In case of minor malfunctions, please refer to the following solutions. If the below solutions do not resolve the issue, please contact customer
support for further examination and repair.
MALFUNCTION CAUSE SOLUTION
Leaking Connection loose Check connection between hose and main and tighten it.
No Flush Water Supply Issue Check water supply for abnormality and ensure supply valve is on.
Low Flush Volume
Low water pressure or
low water volume
Please ensure the water pressure over 0.14 MPa or Water volume over 18
L/min
Slow refill time
Please wait for at least 50 seconds after previous flush.
No flush by waving hand Opration mode in Touch mode Opration mode setting to Wave mode
«Beep» thrice at intervals The main storage battery low Replace the main battery (see page 3 for operation).
Indicator blink three times
The remote control storage
battery low
Replace the remote control battery (see page 8 for operation).