Introduction
AX-Power 4 Plus Switch Kit is an expansion kit for the AX-Power 4 Plus. With one Switch Kit, four
additional PoE ports are obtained. The switch kit is installed in the AX-Power 4 Plus, using the
included mounting plate, power cable and patch cable. AX-Power 4 Plus can host a maximum of
two switch kits up to twelve PoE ports.
Security
This instruction must be read in its entirety by all operating personnel.
In
case of doubt about the unit's structure, function, components or safety, Axema must be con-
tacted.
Only a qualified electrician may install and maintain this unit. Only insulated tools should be used
when working with the unit. Note that dangerous voltages and currents can occur in the unit regard-
less of whether the internal fuses are switched on or off.
Check that the circuit boards are permanently mounted and that the unit is not damaged during
transport.
If batteries are used, they are always electrochemically active. Do not short-circuit the battery ter-
minals.
2 (4)
ManualAX-Power 4 Plus
