AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE
– [email protected] – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 -
Capital : 500 000,00 €
Fichier :
AT-07
tablet
user
guide20190423_AT-
07_user_guide AT-07 tablet
Version : V1.0
35/46
4.4
RFID HF (High Frequency) Card Identification
RFID UHF module supports working frequency and international common RFID UHF standards,
including all rate and coding options. Users can choose required configuration according to demand,
demo program interface is shown as below:
Configure Description: Card access password is eight hexadecimal digits and letters, the program
defaults to 8 0, if the relevant area of the test label has been set read protection, shall be provided
to the measured actual label access password. In the absence of a read-write protected
card, no real
access password can also read and write data. In addition to read and write the same password and lock
password, use the following functions, you need to specify an arbitrary matching cards or after
operational. Starting address for the selected four BANK any address within the read is not greater than
the number of the remaining space of the BANK. Read data word (2 bytes) for the unit.
Click read button to read the read configuration in accordance with the information in each BANK,
Reserved in the first two bytes for the destruction of passwords, access codes after two bytes; EPC area
store EPC number; TID area store identification label number, each TID number is unique; User zone is
a user-defined data area. Moreover module can also be equipped with a high reading and writing data in
a BANK.
Note:
Tid area can be read only, write and unlock functions cannot be operated. Different module option
is different.