STREAMER MAX MKII
– GENERAL DESCRIPTION
| STREAMER MAX MKII
– GENERAL DESCRIPTION
19
9.3 STREAMER MAX MKII
– REAR PANEL (COMMON ALSO TO ELITE)
N°
CONTROL NAME
FUNCTION
1
POWER SUPPLY UNIT
The power supply unit features a switch to switch on the device and a
power socket. For the change of the fuse, see the relevant chapter. The
fuse is located inside the device, near the switching power supply unit.
The fuse is of the slow blow type, 230 V a.c. and 2,000 A, equal to 2000
mA. Please refer to previous page to check the exact power supply used
in the unit. Some unit are fuse-less with self resetting fuse.
2
“USB” PORT
USB -A
type data communication port. This port is used to connect
devices as Serial
– USB converter, or certified USB UMTS modem sim
card base.
3
ETHERNET PORT
Streamer MAX is fitted with an Rj45 Ethernet port for LAN/WAN-type
connections, to monitor and control the device. This port also provides an
integrated web server, so the Streamer MAX can be controlled remotely
using a standard web browser. The same port also features an SNMP
agent (
see Appendix
).
4
“DIGITAL” UNIT
This section contains the connections for AES/EBU digital outputs.
Electronically balanced
5
“DIGITAL/ANALOG” UNIT
This female connector allows two function. When the analog output it’s
selected, this connector is the Left input for Analog in. When Digital it’s
selected this connector
it’s the Digital Audio Input on AES/EBU format.
6
“ANALOG” INPUT
Analog Right input over XLR balanced connector
7
“ANALOG” OUTPUT
ANALOG audio output of the Streamer MAX. Electronically balanced
output on XLR connector (type: stereo / mono)
9
“GPIO” PORT
9pin female interface on SubD connector. This shows the logic status of
the Streamer MAX. The GP outputs are Open Collector outputs, while
the GP inputs are optocouplers.