SIM CARD READER
Introduction
1) Linker interface contemplate a Sim card use arranged for Pin Code request (Personal
Identification Number) at each equipment activation.
2)Sim card insert has to be made before any other operation.
For this operation is needed to:
a)Remove the 6 fixing screws of top panel.
b)Remove the top panel
c)Remove the little mobile panel situated under the GSM module (as in the analytic picture as
below).
Linker - Gsm Audio Interface Operation Manual
Linker Gsm Audio Interface
Linker is provided with an inside SIM CARD reader .
d)To raise the box blocking it and insert again the little mobile panel.
e)To screw the top panel with its 6 screws.
It's a flip-up model stuck into an horizontal position and accessible by a little mobile
panel as shown in the picture.
