AWS Storage Gateway User Manual Download Page 31

Page: 31 / 438

AWS Storage Gateway User Guide

Supported AWS Regions

Using the AWS Storage Gateway

Hardware Appliance

The AWS Storage Gateway Hardware Appliance is a physical hardware appliance with AWS Storage

Gateway software preinstalled on a third-party server. You can manage your AWS Storage Gateway

Hardware Appliance from the

Hardware

page on the AWS Management Console.

When you create new gateway in the AWS Storage Gateway console, you have the option to run the

gateway appliance on virtual platforms. AWS Storage Gateway supports VMware ESXi, Microsoft Hyper-

V, and Amazon EC2 as hosts. Now you can also use the AWS Storage Gateway Hardware Appliance as

a host in Europe in addition the United States. If you don't already own a hardware appliance and you

choose to use one, go to the

website and purchase

one. You can also purchase one from the AWS Storage Gateway console. From the

Hardware

page, you

choose

Buy Hardware Appliance

and you will be directed to the appropriate Amazon website where you

can purchase the appliance.

The hardware appliance is a high-performance 1U server that you can deploy in your data center, or on-

premises inside your corporate ﬁrewall. When you purchase and activate your hardware appliance, the

activation process associates your hardware appliance with your AWS account. After activation, your

hardware appliance appears in the console as a gateway on the

Hardware

page. You can conﬁgure your

hardware appliance as a ﬁle gateway, tape gateway, or volume gateway type. The procedure that you use

to deploy and activate these gateway types on a hardware appliance is same as you would on a virtual

platforms.

In the sections that follow, you can ﬁnd instructions about how to purchase, deploy, activate, and use an

AWS Storage Gateway Hardware Appliance.

Topics

•

Supported AWS Regions (p. 24)

•

Setting Up Your Hardware Appliance (p. 25)

•

Rack-Mount Your Hardware Appliance and Connect It to Power (p. 25)

•

Conﬁgure Network Parameters (p. 27)

•

Activate Your Hardware Appliance (p. 29)

•

Launching a Gateway (p. 32)

•

Conﬁguring an IP Address for the Gateway (p. 33)

•

Conﬁguring Your Gateway (p. 34)

•

Removing a Gateway From the Hardware Appliance (p. 34)

•

Deleting Your Hardware Appliance (p. 34)

Supported AWS Regions

AWS Storage Gateway Hardware Appliance is only available in the US and Europe. You can connect your

appliance to one of the AWS Region endpoints in the US or Europe. For information about supported

AWS Regions, see

AWS Storage Gateway Hardware Appliance Regions

in the

AWS General Reference

API Version 2013-06-30

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands