SETTING UP AND MANAGING ETHERNET GATEWAYS
Placing and installing an Ethernet Gateway
SKF Axios
User Manual
Revision A
19 (83)
use an expansion plug or toggle bolt (not included) to secure the screw in the
wall.
Figure 12
Screw mounting
Tape mounting
A shaped piece of double-sided tape is included in the gateway box. Use it when
you can't place a screw into the mounting surface. You can also use it in
combination with the other methods of mounting for a more secure installation.
Remove the backing on one side of the tape and apply the tape to the back of the
wall mounting bracket between the four raised sections.
Remove the remaining backing and apply the bracket to the mounting location.
Press hard on the bracket to make sure that the tape firmly adheres to the
surface.
Figure 13
Tape mounting
Plastic-tie mounting
To mount a gateway to a smaller non-wall location, such as a pillar or fence, use
cable ties (also known as zip ties) to fasten the wall mounting bracket. Put the
