PS-25
IV. Operation
1.
Place the scale on a flat, level surface and press the
ON/OFF
key to turn the scale on.
2. Once the start-up process completes and the scale goes to
zero you are ready to weigh.
3. Place the quantity to be weighed onto the weighing platform.
4. Wait a couple seconds for the display to stabilize before taking
a weight reading.
V. Hold Feature
1.
To use the hold feature, first place an item on the scale
platform.
2. Press the HOLD button located on the side of the scale.
3. The display will show HOLD and the weight will be held on
the display, even after the item is removed. This allows you to
record the weight of oversized boxes that cover the display.
4. To return to normal weighing, press the HOLD key again. The
HOLD indicator will turn off.
VI. Changing the Unit of Measure
1. Press the
MODE
key to change the scales displayed unit of
measure.
2. If the scale is turned off then back on, it will default to the last
unit used.
•
PS-25 Units:
lb (pound), kg (kilogram), kg:g (kilogram:gram),
lb:oz (pound:ounce)
VII. Using the Tare Feature
You can use this scale’s tare feature to subtract the weight of an
empty container or vessel for net weight determination. NOTE: The
weight of the container will subtract from the available capacity.
1. Place the empty container or vessel on the weighing platform.
2. Press the
TARE
key once. The display will then reset to zero.
If the container is removed, it’s weight will be displayed as a
