PK-110 Manual
Low batteries can cause inaccuracy in digital scales. If
you are experiencing issues with your scale, first try new
batteries. Most times, this will solve the problem.
1.
Before using the scale for the first time, check
the battery compartment and remove any plastic
insulation strips or packaging that may be in place to
prevent battery drainage during shipping/storage.
2. If you are replacing the batteries, make sure the
positive and negative contacts are properly aligned.
IV. Operation
1. Press the
ON/OFF ( )
key to turn the scale on.
2. Once the start-up process completes and the scale
goes to zero you are ready to weigh.
3. Place the quantity to be weighed onto the weighing
hook.
4. Wait a couple seconds for the display to stabilize
before taking a weight reading.
5. To turn the scale OFF, press the
ON/OFF
key again.
V. Hold Settings
This scale has three different hold settings. Follow these
instructions to change the hold setting:
1. With the scale OFF, press and hold the
Z/T
key, then
tap the
ON/OFF ( )
key. Release both keys when
you see “------” on the display.
2. Tapping the
Unit
key will cycle through the three
hold settings:
