p.
II. Weighing
1. Turn on the scale as described in Part I. Wait for the scale
to go to zero.
2. Place your food items on the scale and read the weight on
the LCD.
3. The scale will turn off automatically if idle for 60 seconds.
Special Note:
To weigh additional items in the same bowl, you
can press the Tare button in between adding ingredients to reset
the display to zero.
Overload:
The maximum weight that the scale can weigh at one
time is 11 lbs (5kg). Weighing items more than this will cause the
display to show “Error”. Remove the excess weight.
II. Obtaining Nutritional Data
1. With the scale on, place the food item onto the weighing
platform.
2. Find the 3-digit code for your item in the food code list
(page 8).
3. Using the number-pad, enter the 3-digit food code. The food
code is displayed in the upper left hand corner of the LCD.
4. Press the CLR/MC button if you make a mistake. The code
is confirmed once all 3 digits are entered.
5. Once the code is confirmed, you may press any of the
nutritional keys (Cal, Sal, Prot, Fat, Carb, Col, Fibr) to obtain
nutritional information. See the Keypad Description section for
further information on the nutritional keys.
6. When you are finished with that food item, press the
CLR/MC key to clear the food code and enter a new one.
7. You may press the g/oz/WT button to return to normal
weighing mode at any time.
