MDI-20
IV. Scale Operation
1.
Place the scale on a flat, level surface.
2. Press the
/TARE
key to turn the scale on and weight for
the display to show “0.0”.
3. You may now place your baby onto the scale.
4.
When you are finished weighing, hold the
/TARE
key to
turn the scale off.
V. Zeroing The Scale
If you wish to zero out the weight of an item such as a blanket,
follow these steps:
1. Place the blanket on the center of the weighing platform.
2. Wait for the weight to stabilize then tap the
/TARE
key
briefly. The display will reset to zero.
3. Now place the baby on the scale. Only the baby’s weight
will be displayed.
4. When the blanket and baby are removed, a negative
number will be displayed. Tap
/TARE
to reset the display
back to zero again.
VI. Changing the Unit of Measure
1. Press and hold the
UNIT
key for 3~4 seconds to change
the scale’s displayed unit of measure.
2. If the scale is turned off then back on, it will default to the
last unit used.
•
MDI-20 Units:
kg (Kilogram) lb:oz (Pound:Ounce)
VII. Memory Function
1. Place an item to be weighed on the scale platform.
2.
Once the weight has stabilized, the display will flash, show
weight value until the
/TARE
key is pressed again.
3. Press the
SET
key to recall the last weight result.
