the contents.
4. To return to normal weight display (gross weight),
remove any items from the weighing platform and
press the
TARE
key again to re-zero the scale.
VII. Backlight Feature
This scale features a back-light that can be turned on or off.
The back-light is enabled by default.
1. To disable, press the
LIGHT
key.
2. To enable, press the
LIGHT
key again.
VIII. Parts Counting Feature
All object must be of uniform weight for counting to work.
1. Turn on scale as described above.
2. Place a sample quantity (25, 50, 75, or 100pcs) of
the material you want to count on the platform
3. Press and hold the
PCS
key for 2 seconds until a
number is displayed (ie. 100pcs).
4. Press
UNITS
to change the sample quantity to
match the number you have on the platform.
5. Press the
PCS
key again to confirm the number.
6. You may now remove the sample quantity and add
any amount of the material to the platform, and the
display will show a count.
7. You can switch between weighing and counting
mode by pressing
PCS
or
UNITS
respectively.
IX. Calibration
Calibration and adjustment are performed at the factory.
However, the weighing range can shift slightly during
shipping. Also, due to changes in local acceleration of gravity
