MPR-1510 3.2x
- 3 -
Doc# 041313
AWID PROPRIETARY
This device has been designed to operate with the antennas listed below, and having
a maximum gain of 10 dBi. Antennas not included in this list or having a gain greater
than 10 dB are strictly prohibited for use with this device. The required antenna
impedance is 50 ohms.
1) Mti, model MT-263003/N; 10 dBi Linear polarization directional antenna
(Patch)
2) Snyder Antenna Systems, part # ANT-UHF-1x4-SMA; 2 dBi Dipole antenna
(Dipole)
3) AWID, model HYBRID 915MHz; 6 dBi Circular polarized antenna (Patch)
4) Mti, model MT-262002/N/A; 8 dBi Linear polarization directional antenna
(Patch)
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than that required for successful communication.
C AUTION:
Reader should be positioned so that personnel in the area for prolonged periods may
safely remain at least 23 cm (9 in) in an uncontrolled environment from the reader s surface.
Observe FCC OET Bulletin 56 Hazards of radio frequency and electromagnetic fields and
Bulletin 65 Human exposure to radio frequency electromagnetic fields.
