AWH TANKO JM100, Operating & Installation Instructions Manual, Page: 30 / 104

Jet Cleaner TANKO-JM
20/90 Translation of the original Operating / Installation Instructions 2016/12 3 Construction and Function
Designation TANKO-JM100 TANKO-JM500 TANKO-JM800
Range
–
Cleaning radius
–
Wetting radius
2 m / 6.5 ft
4 m / 13 ft
2.5 m / 8 ft
5 m / 16.5 ft
3.5 m / 11.5 ft
7 m / 23 ft
Operating temperature (permitted)
–
Cleaning agent max. +95 °C / +203 °F max. +95 °C / +203 °F max. +95 °C / +203 °F
Ambient temperature (permitted)
–
Inside the container min. +5 °C / +41 °F
max. +140 °C / +284 °F
min. +5 °C / 41 °F
max. +140 °C / +284 °F
min. +5 °C / +41 °F
max. +140 °C / +284 °F
Operating pressure
–
Cleaning agent 3
–
10
–
20 bar /
44
–
145
–
290 psi
3.5
–
13 bar /
51
–
189 psi
5
–
13 bar /
73
–
189 psi
Volume flow rate / flow See chart Figure 3.3-1
and Figure 3.3-2
See chart Figure 3.3-3 See chart Figure 3.3-4
Process connection [PC] not specified (provided by
the operating company)
not specified (provided by
the operating company)
not specified (provided by
the operating company)
Media connection [MC] 3/4" BSP or NPT
Inner thread
1
½
" BSP or NPT
Inner thread
1
½
" BSP or NPT
Inner thread
Number of nozzles
–
optional
4 (2x2)
---
4 (2x2)
---
3 (1x3)
2 (1x2)
Nozzle bore Ø 3.2 / 3.7 / 4.3 mm Ø 6.5 / 8.0 / 9.5 mm Ø 8.0 / 9.5 mm
Jet movement 360° orbital 360° orbital 360° orbital
Actuator type Hydraulic with cleaning
agent
Hydraulic with cleaning
agent
Hydraulic with cleaning
agent
Sound pressure level
–
Outside the container
Depends on the properties of the container!
The sound pressure level may exceed the permitted
exposure value of LE
X,8h
= 85 dB(A).
Translation
–
Actuator : Cleaning head 1 : 1 1 : 1 1 : 1
Speed of the cleaning head
around the downpipe [DP]
≈ 5 –
20 rpm
≈ 5 –
20 rpm
≈ 5 –
20 rpm
Cleaning time See section 3.2.1 See section 3.2.2 See section 3.2.3
Installation opening
–
Stationary device
–
Mobile device
See section 5.2.1
Ø 100 mm / Ø 4 in
> Ø 130 mm / Ø 5 in
See section 5.2.1
Ø 220 mm / Ø 8½ in
> Ø 280 mm / Ø 11 in
See section 5.2.1
Ø 310 mm / Ø 12 in
> Ø 380 mm / Ø 15 in
Orbital nozzle movement Ball Ø
120 mm / 4¾ in
Ball Ø
270 mm / 10½ in
Ball Ø
370 mm / 14½ in
Materials
–
In contact with media
–
Other
1.4404 (AISI 316L)
PTFE; PEEK+PTFE,
1.4301 (AISI 304)
1.4401 (AISI 316)
1.4571 (AISI 316Ti)
1.4404 (AISI 316L)
PTFE; PEEK+PTFE,
1.4401 (AISI 316)
1.4571 (AISI 316Ti)
1.4404 (AISI 316L)
PTFE; PEEK+PTFE,
1.4401 (AISI 316)
1.4571 (AISI 316Ti)
Weight (standard)
≈ 1.2 kg ≈ 5.2 kg ≈ 7.2 kg
Table 3.3-1: Operating parameters of the device