Copyright 2019, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev1.0
Install the AWE turbo inlet coupler to the
4.5”
AWE intake tube with the supplied 100
-
120 worm
drive clamp, shown in Figure 7.
Install the
4.5”
AWE intake tube to the turbo inlet
using the OEM hose clamp (
A
), reattach the
plastic line (
B
), and reinstall the OEM bolt (
C
), as
shown in
Figure 8
.
Careful not to over tighten hardware, as
carbon could crack.
Slide the supplied
4.5”
silicone flex coupler hose
with the 2 supplied 100
-
120 worm drive clamp,
as shown in
Figure 9.
Note:
Do not tight hose clamps at this point.
