background image

 

5

 
SAFETY INFORMATION: 

Your wireless portable two-way radio has been designed using a low power transmitter. 
When the 

PTT 

switch is pressed, the radio generates radio frequency (RF) electromagnetic energy 

(EME). This radio is designed to comply with the FCC Report and Order 
FCC 96-326 (August, 1996). 

 

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
generate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following 
measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and receiver. 
• Connect the equipment to an outlet on a circuit different from that to which the receiver is 
connected. 
• Consult the dealer for technical assistance. 

Summary of Contents for AWR1688























Reviews: