Award VTC820, User Manual

Page: 11 / 35

INSTALLATIONS
VTC820 User’s Manual 7
ATX Power Installation
The system power is provided to the VTC820 CPU card with the J1 and J8
ATX power connectors. Please note that the J8 external ATX power
connector should be connected to the backplane for VTC820 to function. J8
is a 3-pin power connector. J1 is a 4-pin 12V power connector. J1 is to be
connected to the ATX power supply.
MicroPCI Daughter Card Installation
To insert the MicroPCI daughter cards, position it at 30
°
to the PCB and
gently push it into the MicroPCI connector (See Figure 1 below). The card
will not fit when inserted at an angle of 45
°
or 15
°
. Once inserted, slowly
press the card towards the PCB until it locks on both sides to the clips of
the connector. Screw the card to the PCB to secure the installation. To
remove the MicroPCI card, pull the ‘clips’ sideways as shown in Figure 2
below.
Figure 1. Figure 2.