(1) Place the vanity against the wall, use a spirit level to
ensure it is level (Dia. A).
(2) Apply a bead of silicone around the edges of vanity
cabinet and on top panels before assembling the vanity
basin top. (Dia. B)
(3) Place the vanity basin top onto the cabinet (Dia. C) Align
it while silicone is still curing. To prevent any water
penetration behind the vanity use silicone to create a
seal at the joint between the wall and vanity unit. Wipe
off any excess silicone and residue by using a cloth and
methylated spirit or wax/grease remover.
(4) A Licensed plumber must complete all pipe work and
connect water supply lines.
(5) Allow 24 hours for silicone to cure before using this
vanity.
INSTALLATION STEPS
Dia. A
Dia. B
Dia. C
CARE INSTRUCTIONS
The product you have purchased has been designed to provide
many years of dependable service, however, the finish requires
care and maintenance in order to delay the wear that will
eventually occur over time.
It is recommended to clean with a non ammoniated pure liquid
soap to remove any stains or water spots. Ensure to rinse all
traces of soap thoroughly. Use a soft cloth to clean and dry the
product.
DO NOT use any harsh chemicals such as bleach or any
scouring cloth/pad to clean the product as it will scratch the
surface and damage the product finish/surfaces.
2
22
October 2015
