INTRODUCTION
MI930 User’s Manual
3
MI930 Specifications
CPU Supported
AMD Athlon™ 64 / Athlon™ 64 x2 (dual core) / Sempron™ 64-bit
processor integrated w/ DDRII memory controller in CPU.
CPU Voltage
0.700V ~ 1.5V
System Speed
Up to 2.8GHz or above
CPU FSB
800MHz FSB
Cache
128K/256K/512K1MB/2MB
Green /APM
APM1.2
CPU Socket
Socket AM2 (940pin)
Chipset
ATI M690T / SB600 chipset
NB: M690T, 465-ball FCBGA (21x21mm)
SB: ATi SB600, 549-ball FCBGA (23x23mm, 0.8mm pitch)
BIOS
Award BIOS, support ACPI Function
Memory
DDR2 800/667/533 SDRAM DIMM x2 (w/o ECC function), Max. 4GB
VGA
ATi M690T built-in Radeon X700 based graphic engine, supports full
DirectX9.0. RS690T integrates TMDS controller for DVI and 18 or
24-bit LVDS interface. Supports dual display for below display
combinations:
- Analog (CRT) + digital (DVI or LVDS)
- Both digital (DVI + LVDS)
LAN
Marvell 88E8053 PCI-e Gigabit LAN controller x2
USB
ATi SB600 built-in USB 2.0 host controller, support 6 ports
Serial ATA Ports
ATi SB600 built-in SATA II (3.0Gb/sec) host controller, supports 2
ports and RAID 0, 1 function
Parallel IDE
ATi SB600 built-in one channel Ultra DMA 33/66/100/133
Audio
ATi SB600 built-in audio cont AC97 Codec ALC888 w/ 7.1
channels
LPC I/O
W83627EHG: COM1 (RS232), COM2 (RS232/422/485) & hardware
monitor (3 thermal inputs, 4 voltage monitor inputs, 2 fan headers).
Parallel, IrDA & Floppy not used
Digital IO
4 in & 4 out
Keyboard/Mouse
Supports PS/2 keyboard/mouse connector
Expansion Slots
PCI slot (32bits/33MHz) x1
8x2 pin-header x1 for LPC TPM adaptor card (reserved) or
8x2 pin-header x1 for LPC 2
nd
I/O adaptor card COM3 /COM4
(RS232) or COM3 /COM4 /COM5 /COM6 (RS232) (reserved)
Edge Connector
PS/2 connector x1 for keyboard/mouse
DB9 & DVI stack connector x1 for COM 1 and DVI
RJ-45 + dual USB stack connector x2 for LAN1, 2 & USB1~4
RCA jack 3x1 for audio (Line-in, Line-Out, Mic.) & pin header for front
panel (Line-Out2, Mic2)
Onboard Header/
Connector
DF13-20 x2 for LVDS
40-pin, 2.54mm, box-header x 1 for IDE1
5x2 pin-header x1 for USB5~6
5x2 pin-header x1 for front audio (headphone & Mic.)
10 pin-header x1 for COM2
8x2 pin-header x1 for VGA
Watchdog Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
System Voltage
+5V, +3.3V, +12V, -12V, 5VSB (2A)
Others
Modem Wakeup, LAN Wakeup
Board Size
170mm x 170mm (Mini ITX)
