manualshive.com logo in svg

Award MI910, User Manual

Share
Download
Award MI910 User Manual Download Page 31

BIOS SETUP 

                         MI910 User’s Manual 

27 

BIOS Setup 

 

This chapter describes the different settings available in the Award BIOS 
that  comes  with  the  board.  The  topics  covered  in  this  chapter  are  as 
follows: 

 

BIOS Introduction ........................................................................ 28 
BIOS Setup................................................................................... 28 
Standard CMOS Setup.................................................................. 30 
Advanced BIOS Features ............................................................. 33 
Advanced Chipset Features .......................................................... 36 
Integrated Peripherals ................................................................... 38 
Power Management Setup ............................................................ 42 
PNP/PCI Configurations............................................................... 45 
PC Health Status........................................................................... 46 
Frequency/Voltage Control........................................................... 47 
Load Fail-Safe Defaults ................................................................ 48 
Load Optimized Defaults.............................................................. 48 
Set Supervisor/User Password ...................................................... 48 
Save & Exit Setup......................................................................... 48 
Exit Without Saving ..................................................................... 48 

Summary of Contents for MI910



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands