Award MI800 User Manual Download Page 16

Page: 16 / 66

INSTALLATIONS

MI800 User’s Manual

Connectors on MI800

The connectors on MI800 allows you to connect external devices such as
keyboard, floppy disk drives, hard disk drives, printers, etc. The
following table lists the connectors on MI800 and their respective
functions.

Connector Locations on MI800 ........................................................... 13

FAN1: CPU Fan Power Connector ...................................................... 15

FAN2: System Fan Power Connector .................................................. 15

CN1: DC Jack (DC in, 12V or 19V) .................................................... 15

CN2: PS/2 Keyboard and PS/2 Mouse Connectors ............................. 15

CN3: VGA and DVI Connector........................................................... 16

CN5: 10/100 RJ-45 and USB1/2 Ports ................................................ 16

CN6: GbE RJ-45 and USB3/4 Ports .................................................... 16

CN7: Audio Connector ........................................................................ 16

CN8, CN9: Serial ATA Connectors .................................................... 16

CN10: Mini PCI- E(x1) Connector (bottom side) ............................... 16

CN11: Compact Flash Connector (bottom side) ................................. 16

PCI1: PCI Slot (supports 2 Master) ..................................................... 16

IDE1: IDE Connector .......................................................................... 17

J1: HDD Power Connector (Output: Max. 2A) ................................... 17

J2: ATX_12V Connector ..................................................................... 17

J3: Digital I/O ...................................................................................... 18

J4: COM1, COM2 Serial Ports ............................................................ 18

J5: COM3, COM4 Serial Ports ..........................

錯誤

尚未定義書籤。

J6: Wake On LAN Connector .............................................................. 19

J7: Power LED Connector ................................................................... 19

J8: System Function Connector ........................................................... 19

J9, J10: LVDS Connectors (1st channel, 2nd channel) ....................... 19

J11: USB5/6 Port Pin Header .............................................................. 20

J12, J15: LCD Backlight Connector .................................................... 20

J13: SPI Debug Tools Port (Factory use only) .................................... 20

J16: Audio Front Header ..................................................................... 20

J18: SPDIF Out Connector .................................................................. 20

J19: Smart Battery Connector .............................................................. 21

Summary of Contents for MI800



































































Search results

Summary of Contents for MI800

Reviews:

Award MI800, User Manual, Page: 16 / 66

Search results

Summary of Contents for MI800

Reviews: